How to choose the right gasketed plate heat exchangerTime of issue : 2022- 06-21
The plate type or corrugated type should be determined according to the actual needs of the heat exchange occasion. In the case of large flow and small allowable pressure drop, the plate type with low resistance should be selected, otherwise,
Plate frame heat exchanger parts assembly and equipment installation precautionsTime of issue : 2022- 06-09
1. Pay attention to the center of gravity of the equipment when hoisting.
2. When bonding the gasket to the gasket groove, it should be ensured that there are no debris such as sand, oil, iron filings and flux on the gasket and in the gasket groove of the plate, so as not to damage the seal and cause leakage.
The problem of heat transfer and pressure drop of plate frame heat exchangerTime of issue : 2022- 06-07
Heat exchanger, as the name suggests, is a kind of equipment for heat exchange, which is used in all walks of life. Heat transfer and pressure drop are two issues that users are more concerned about.
Cases where vicarb heat exchangers cannot be usedTime of issue : 2022- 06-02
It is not suitable to use vicarb heat exchanger in the range of 250℃. The design temperature of the heat exchanger mainly depends on the temperature that its sealing gasket can withstand.
How vicarb heat exchangers prevent corrosionTime of issue : 2022- 05-31
How to choose suitable anti-corrosion measures can achieve the purpose of using equipment efficiently. In view of the relevant situation of corrosion,
Types of Air Heat ExchangersTime of issue : 2022- 05-27
The air heat exchanger is when the heat is transferred to the top of the equipment, it is to quickly discharge the transferred heat to the surrounding environment.
Application Scope of Heat ExchangerTime of issue : 2022- 05-25
A heat exchanger is a device that transfers part of the heat of a hot fluid to a cold fluid, also known as a heat exchanger.
Matters needing attention in the commissioning process of vicarb heat exchange unitTime of issue : 2022- 05-23
Sufficient space should be reserved around the installation of the vicarb heat exchange unit
Cleaning process of plate heat exchangerTime of issue : 2022- 05-19
1. Isolate the equipment system and drain the water in the heat exchanger.
2. Use high-pressure water to clean the sludge, algae and other impurities remaining in the pipeline, and then close the system.
Application of plate heat exchangerTime of issue : 2022- 05-17
a. Refrigeration: Used as condenser and evaporator.