What are the characteristics of funke plate heat exchanger
- Categories:plate heat exchanger
- Author:
- Origin:
- Time of issue:2022-04-18
- Views:0
(Summary description)The funke plate heat exchanger is made by stacking many corrugated metal sheets, which are sealed around by gaskets, and a thin rectangular channel is formed between each sheet, and heat exchange is carried out through the sheets.
funke plate heat exchanger cost
funke plate heat exchanger cost
What are the characteristics of funke plate heat exchanger
(Summary description)The funke plate heat exchanger is made by stacking many corrugated metal sheets, which are sealed around by gaskets, and a thin rectangular channel is formed between each sheet, and heat exchange is carried out through the sheets.
- Categories:plate heat exchanger
- Author:
- Origin:
- Time of issue:2022-04-18
- Views:0
The funke plate heat exchanger is made by stacking many corrugated metal sheets, which are sealed around by gaskets, and a thin rectangular channel is formed between each sheet, and heat exchange is carried out through the sheets. Funke plate heat exchanger is the most ideal equipment for liquid-liquid and liquid-vapor heat exchange. Because the plate heat exchanger has high heat exchange line efficiency, small heat loss (the heat recovery rate is as high as 90%), light structure, does not occupy an area, and is more convenient for later installation and cleaning, compared with conventional shell-and-tube heat exchangers, Under the same parameters, the heat transfer coefficient is much higher, so in some fields, plate heat exchangers can replace the use of shell and tube heat exchangers.
First, from the outside, the funke plate heat exchanger occupies a smaller footprint and is lighter in weight than the shell and tube heat exchanger.
Second, from the point of view of use, the heat exchange efficiency of the plate heat exchanger is very high, which is higher than that of the shell and tube type!
Third, from the structural point of view, the plate heat exchanger is composed of a threaded plate and a sealing ring. The freedom of assembly is also very easy for later dirt cleaning and maintenance.
Fourth, maintenance is convenient and should be extensive.
Disadvantages of funke plate heat exchanger: 1. The service life is not as long as that of the shell and tube heat exchanger, the pressure is small, and the temperature is not high. 2. The sealing ring is easily damaged and leads to leakage.
Scan the QR code to read on your phone
Contact Us
WeChat Public
Copyright: Tianjin Jinfan Mould Co., Ltd. 津ICP备20001482号-1 Powered by www.300.cn