-
Matters needing attention in the commissioning process of vicarb heat exchange unitTime of issue : 2022- 05-23
Sufficient space should be reserved around the installation of the vicarb heat exchange unit
-
Cleaning process of plate heat exchangerTime of issue : 2022- 05-19
1. Isolate the equipment system and drain the water in the heat exchanger.
2. Use high-pressure water to clean the sludge, algae and other impurities remaining in the pipeline, and then close the system. -
Application of plate heat exchangerTime of issue : 2022- 05-17
a. Refrigeration: Used as condenser and evaporator.
-
Plate heat exchanger, unsatisfactory heat exchange is affected by those factorsTime of issue : 2022- 05-13
Plate heat exchangers are believed to be familiar to many of us as an important helper in our daily life, so do you know that plate heat exchangers are not ideal and are affected by those factors?
-
Application of plate heat exchangerTime of issue : 2022- 05-11
Reasonable selection of heat exchange area is the key to procurement. When choosing a heat exchanger, first of all, it is necessary to select the required flow rate according to the process requirements, the viscosity of the material and the liquid, and the heat exchange temperature difference.
-
What are the characteristics of the gas flow in the heat exchangerTime of issue : 2022- 05-09
Heat exchangers are widely used, but do you know what are the characteristics of gas flow in heat exchangers?
-
Diagnosis and Treatment of Common Operating Failures of Plate Heat ExchangersTime of issue : 2022- 05-06
If the newly put into production plate heat exchanger fails to meet the process requirements, it should carefully check whether the original design parameters, design calculation, assembly, etc.
-
How to choose the process flow channel and version of the gasketed plate heat exchangerTime of issue : 2022- 05-01
Gasket plate heat exchanger is a new type of high-efficiency heat exchanger formed by stacking a series of metal sheets with a certain corrugated shape.
-
What factors can affect the heat exchange effect of gasketed plate heat exchangersTime of issue : 2022- 04-29
Many equipment will have high temperature after long-term operation. If the gasketed plate heat exchanger is not used for heat dissipation, some performance of the equipment will be affected.
-
What factors are related to the efficiency of gasketed plate heat exchangersTime of issue : 2022- 04-27
1. The heat exchange element materials of the gasketed plate heat exchanger are mainly titanium and stainless steel, metal sheets with a thickness of 0.5-8mm.
Copyright: Tianjin Jinfan Mould Co., Ltd. 津ICP备20001482号-1 Powered by www.300.cn