The flat plate heat exchanger manufacturer tells you that the plate type or corrugated type should be determined according to the actual needs of the heat exchange occasion. For the case of large flow rate and small allowable pressure drop, the plate type with small resistance should be selected, otherwise, the plate type with large resistance should be selected.

The heat transfer efficiency of the plate evaporator (the total heat transfer coefficient is 2-4 times that of the tube evaporator), the K value is generally 3500-5800KW/(M2 K),

Can be divided into single-effect and multi-effect evaporation. If the secondary steam generated by evaporation is directly condensed and no longer used, it is called single-effect evaporation.

Adhesive and non-adhesive gaskets are two commonly used gasket methods for plate heat exchangers in the world. In addition to this technology, Thermowave has a special super-seal no-exposed stick-free system.

Now, do you know that the Funke plate heat exchangers we use in our daily life are used in those industries?

The funke plate heat exchanger is made by stacking many corrugated metal sheets, which are sealed around by gaskets, and a thin rectangular channel is formed between each sheet, and heat exchange is carried out through the sheets.

In the funke plate heat exchanger, because the different media involved in heat exchange will be corrosive to the corresponding material plates, it is very important to select the appropriate material plates according to different heat exchange media.

Plate heat exchanger is an ideal equipment for liquid-liquid and liquid-vapor heat exchange. It is a new type of high-efficiency heat exchanger formed by stacking a series of metal sheets with a certain corrugated shape.

The heat wave heat exchanger needs to be repaired and maintained after a long time of use, and the interior of the surface should be cleaned to prevent the deposition of dirt after long-term use, resulting in low efficiency of the heat wave heat exchanger. What are the dangers of not cleaning?

Now, do you know how to clean the dirt from the liquid to liquid heat exchanger used in our daily life?